DIY Party Backdrop: Removable Red Velvet Wall

the ultimate hostess guide to entertaining at home

Join our Glam Tribe where you receive weekly updates and instantly unlock the Elevated 4-Phase Host Collection.

The Ultimate Hostess Guide To Entertaining At Home Freebie

A Velvet Wall Without Touching My Real Wall

I wanted a red velvet accent wall. The problem? I already have an accent wall, covered in wallpaper I love and had no intention of damaging.

So I built a fake one. This faux red velvet wall is made from foam board and peel-and-stick velvet wallpaper, sized to fit right over my real accent wall. Nothing is nailed, glued or taped to the wall underneath. It fits snugly in the space and comes down when I'm done.

It makes a dramatic backdrop for a holiday cocktail party, a bar cart, a dessert table or a photo spot. And when the season is over, my real wall is exactly as I left it.

 

Blue patterned accent wall before the velvet makeover

Watch the Full Tutorial

DIY party backdrop made with a removable red velvet accent wall

What You'll Need

This post contains affiliate links. If you buy through them, I may earn a small commission at no extra cost to you.

My wall covers an accent wall that is 68 inches wide and 78 inches tall. Measure yours first: a bigger or smaller wall will need more or fewer boards.

Supply Details Where to get it
Foam boards (9) 20 x 30 inches https://go.shopmy.us/p-104556198
Red velvet peel-and-stick wallpaper Red Velvet Fabric Vintage Wallpaper, Stick and Peel, 17.7 x 393 inches (one roll) https://go.shopmy.us/p-104552882
Duck brand duct tape Silver, 1 7/8 inches x 10 yards https://go.shopmy.us/p-104554237
Double-sided tape For attaching the wallpaper with the backing left on https://go.shopmy.us/p-104554749
Omnigrid cutting mat 24 x 36 inches https://go.shopmy.us/p-104553770

 

The supplies came to about $70, plus tape. I already own the cutting map, double-sided tape, and a box cutter. Prices are what I paid and may have changed. You will also need a box cutter, scissors and a tape measure. 

How to Build It

  1. Measure your wall. Write down the width and height. Plan to make your fake wall just a hair taller than the space. That extra bit is what lets it fit snugly against the real wall without anything holding it there.
  2. Lay out the foam boards. Stand each board vertically, so it's 20 inches wide and 30 inches tall. Stack three boards top to bottom to make one column, 20 x 90 inches. Make three columns side by side, and you have a 60 x 90-inch wall. 
  3. Tape the seams. Join every board to its neighbors with duct tape along each seam. 
  4. Trim it to size. My wall needed to be 68 x 78 inches, so the 60 x 90-inch panel was too tall and too narrow. I trimmed the bottom row to bring the height down to just over 78 inches, then used the pieces I cut off to add 8 inches to the width.Foam boards laid out in a grid and taped together to form the base of a removable velvet accent wall
  5. Cover it with velvet wallpaper. Run the wallpaper in strips from top to bottom. At 17.7 inches wide, three full strips cover about 53 inches, and a fourth strip trimmed to about 15 inches finishes a 68-inch wall. One roll was enough. Working alone, I left the backing on and attached each strip with double-sided tape, because it's much more forgiving to line up straight.Red velvet fabric and supplies laid out for a removable accent wall
  6. Slide it into place. Stand the wall up and push it flush against your accent wall. Because it's a hair taller than the space, it fits snugly and stays put with nothing attached to the real wall. 

DIY party backdrop made with a removable red velvet accent wall

DIY party backdrop made with a removable red velvet accent wall

What to do Differently

It took me a few hours on my own. It's doable, but here's what I'd change next time.

  • Get a second person. I did this by myself, and it was extremely difficult. Handling large foam panels and long strips of wallpaper is so much easier with an extra set of hands.
  • Peel the backing. With a helper, I'd peel off the backing and use the wallpaper's own adhesive. It sticks much better than double-sided tape.
  • Store it carefully. With the backing left on and only double-sided tape holding it, the wallpaper can lift if the wall gets bumped in storage.

How to Decorate It

The one rule: keep everything lightweight. The wall isn't attached to anything, so heavy decor could pull it forward.

When I first put it up for my Victorian Gothic skull dinner party, every piece on it was light. The portrait was a print with an adhesive border from Amazon to look like a gilded frame. The hands and skulls were foam. Everything went on with regular double-sided tape.

Red velvet wall as the backdrop for a Victorian Gothic skull dinner party

For the holidays, how you use it is up to you. A few ideas:

  • Park a bar cart in front of it for a holiday cocktail party
  • Use it as a photo backdrop
  • Set a dessert table or buffet in front of it
  • Tape on lightweight greenery or ornaments

Make it Yours

A red velvet wall is a big statement, and this version lets you try it without committing a single nail. Grab a friend, a stack of foam boards and a roll of velvet wallpaper, and give your holiday party a backdrop worth gathering around.

Shop the supplies on my ShopMy page

Meet Leigh

For more than 30 years, I’ve been bringing people together through events and experiences—from conferences, trade shows, networking events and galas to milestone celebrations, themed parties and everything in between.

 

Celebrate

DIY & Decor

Entertaining

Inspiration

Stop Second-Guessing. Start Celebrating.

Bring your inspiration to a 60-minute virtual session with Leigh and leave with a clear direction for a celebration your guests will never forget. Reserve your Party Vision Session for $197; after purchase, you’ll receive a questionnaire and a link to schedule your meeting.

the ultimate
hostess guide to
entertaining at home